Tantalex Lithium Pronounces Spectacular Maiden Mineral Useful resource Estimate for the Manono Lithium Tailings Venture

Tantalex Lithium Sources Corp. (CSE:TTX) – (FSE:DW8) – (OTC:TTLXF) (“Tantalex” or the “Company”), is happy to announce a Maiden Mineral Useful resource Estimate for its majority owned Manono Lithium Tailings mission within the Democratic Republic of Congo.


  • 5,46 million tonnes at 0,72%Li2O within the Measured and Indicated class;
  • 6.63 million tonnes in whole Inferred Mineral Sources at a grade of 0,49%Li2O
  • Lithium contained in spodumene and amenable for manufacturing of 6% Li2O Spodumene Focus (SC6)
  • Mineral Useful resource outlined by 11 922 m of drilling in a complete of 368 drillholes
  • Fast path to manufacturing: materials on floor, already crushed; no strip ratio, low mining prices


The Mineral Useful resource was estimated utilizing the Canadian Institute of Mining, Metallurgy and Petroleum (CIM) Finest Follow Tips and is reported in accordance with the 2014 CIM Definition Requirements, which have been integrated by reference into Nationwide Instrument 43-101 – Requirements of Disclosure for Mineral Initiatives (NI 43-101).

A abstract of the Mineral Useful resource estimates per deposit in addition to the overall Measured, Indicated and Inferred Mineral Sources is proven in Desk 1.

Tantalex Table 1

The Mineral Useful resource is assessed into the Measured, Indicated and Inferred classes and is reported at a cut-off grade of 0.20% lithium oxide (Li2O). The cut-off grade and cheap prospects for eventual financial extraction (RPEEE) have been decided utilizing the next assumptions:

  • Mining will probably be undertaken utilizing bulldozers and loaders.
  • Mining value: USD 2.17 per tonne of rock
  • Mining Restoration: 99%
  • Processing value: USD 11.18 per tonne processed (RoM)
  • Income Royalty: 3%
  • Payability: 98.5%
  • Course of Restoration LiO: 50% to 70%
  • Lithium Worth: 4 000 USD/tonne (SC6 – Spodumene Focus)

The evaluation to fulfill the factors of RPEEE is a high-level estimate and isn’t an try to estimate Mineral Reserves.

Eric Allard, President and CEO commented: ‘’ With this Mineral Useful resource Estimate, Tantalex Lithium now enters a choose group of near-term lithium producers. Our comparatively straightforward and low-cost mining course of offers us an unbelievable benefit on our pace to market in comparison with different lithium friends.

With SC6 lithium costs probably set to stay above $4,000 USD/t for the following 6-8 years, our focus is now to convey an preliminary manufacturing of 100,000 tons each year of SC6 to market by 2025. With no offtake agreements but entered into, our mission is presently attracting essential offtaker curiosity.’’

 Licence Boundary of PER 13698 and Tailings locationsDetermine 1: Licence Boundary of PER 13698 and Tailings areas

The Manono Tailings Venture consists of 11 technogenic deposits made up of the reject LCT (Lithium-Caesium-Tantalum) pegmatite materials processed on the Manono-Kitotolo mine from 1919 to the mid-Nineteen Eighties.

Tailings from the Manono-Kitotolo mine have been deposited on floor adjoining to the varied open pits. The coarse tailings have been deposited over a number of years into raised heaps that attain, in some dumps, a most peak of 70 m above floor. The wonderful tailings materials was deposited into flat terraces adjoining to the coarse tailings dumps.

Geology and Mineralization

The lithium mineralization is contained inside technogenic deposits, consisting of 11 particular person tailings dumps, of which 5 type half the Mineral Useful resource, particularly Cc, Ic, Gc, Gf and Ok. The tailings deposits include a mixture of processed pegmatite, laterite and clay materials sourced from the historic Manono-Kitolo mine which operated from 1919 to the mid-Nineteen Eighties. The deposits differ in form and measurement, with Cc, Ic and Gc being lobate in form, extending 815 m by 580 m for the Cc dump, 530 m by 315 m for the Ic dump and 500 m by 320 m for the Gc dump. The peak of every dump varies, with some stacked as much as 78 m excessive above the encircling planes. The Gf and Ok dumps occupy a bigger footprint, with the Gf extending 760 m by 530 m, as much as a most thickness of 33m, whereas the Ok dump has an extent of 700 m by 630 m, as much as a most depth of 24 m. The Ok dump accommodates stacked tailings positioned within the northeast and japanese parts with a most vertical thickness of 45 m. Spodumene is the primary lithium bearing mineral.

Lots of the tailings deposits are composite in nature, consisting of layers of pegmatite, laterite and/or clay layers. These layers have been deposited by mechanical means, together with a lot of the deposits denoted as “fines”, for the exception of the Hf and Gf deposits. These are assumed to have fashioned because of the settling of wonderful materials in standing ponds of water as evidenced by the presence of clay layers in these deposits.

Determine 2 is {a photograph} of the coarse materials (1 mm to five mm gravel measurement) that represents the dominant tailings dump materials within the Venture space.

Few deposits seem to include a single materials kind, the exception to this being the Ok dump which is primarily composed of pegmatite. Determine 3 reveals the white, pegmatite tailings and the partially vegetated cone-like characteristic of the stacked Ok dump tailings, trying south.

Coarse tailings sizeDetermine 2: Coarse tailings measurement

K dump crescentDetermine 3: Ok dump crescent

Sampling and Mineral Useful resource estimation methods

The Mineral Useful resource estimate was primarily based on geochemical analyses of samples obtained by aircore drilling undertaken by Tantalex from September 2021 to July 2022. A complete of 368 drillholes have been drilled throughout 9 tailings deposits, totaling 11 922.24 metres of drilling. The vast majority of the drillholes have been collared on the Ok dump, with 2 120 metres drilled from 156 drillholes. Fifty drillholes have been collared on the Gf dump, 34 on the Ic dump, 25 on the Gc dump and 20 drillholes have been collared on the Ic dump.

Because of the nature and angle of repose of the stacked tailings, drilling on the slopes was not doable. Therefore a majority of the fabric within the slopes has been included within the inferred class.

Samples have been taken in a single metre intervals and composited to a few metres. Three pattern preparation protocols have been used throughout the drilling marketing campaign. The primary protocol was used early within the programme and concerned crushing the pattern all the way down to 2 mm utilizing a roll crusher, after which a 200 g sub-sample was obtained from a Jones Riffle splitter. This 200 g pattern was then sub-sampled by the cone-and-quartering methodology to acquire a 100 g pattern which was pulverised to raised than 80% passing 75 μm. The crushing, splitting and pulverising have been carried out on-site by Tantalex. The second pattern preparation protocol concerned the crushed 200 g sub-sample being ready on-site after which transported to the Congolese Analytical Laboratory (COAL) in Lubumbashi the place the sub-sample was pulverised to 85% passing 75 μm. For the third protocol within the latter a part of the mission, 400 g of pattern have been submitted to COAL the place it was crushed to a 2 mm measurement fraction utilizing a benchtop jaw crusher after which pulverised to 85% passing 75 μm.

The samples have been subjected to a high quality assurance and management (QAQC) programme consisting of the insertion of licensed reference supplies (CRMs), blanks and the inclusion of coarse duplicates. The first laboratory assay outcomes have been confirmed by duplicate samples assayed at a second laboratory. Test samples chosen by the QP have been used for additional affirmation of the lithium assay values and the QP is happy that the outcomes are of enough accuracy and precision to be used in Mineral Useful resource estimation.

Three-dimensional volumes of the tailings have been constructed utilizing drill gap information. The lithium grades have been estimated into block fashions utilizing atypical kriging for the low-lying materials of the Ok dump. The stacked materials of the Ok dump and the Cc, Gc, Gf and Ic dumps have been estimated utilizing inverse distance weighting. Common densities have been assigned to every materials kind.

Metallurgical Testing

A abstract of the HLS outcomes is out there in 2. The HLS take a look at produced focus grades of 6.5% Li2O spodumene at general recoveries throughout the dimensions vary of 47% and 63% for G-dump and Ok-dump respectively. The testwork didn’t produce a SC6 product from the C-dump this requiring additional investigation. These outcomes are for all of the dump materials with a PSD smaller than 5mm.

The lithium recoveries elevated with measurement fraction whereas the tin and tantalum required additional liberation to enhance recoveries.

Desk 2: HLS Abstract Outcomes

 HLS Summary Results

Filling of Report

The NI43-101 compliant technical report (“Report”) will probably be filed on SEDAR throughout the subsequent 45 days.

The Certified Individual for the Mineral Useful resource estimate is Mr. Rui Goncalves (BSc Hons, MSc (Eng.)) who’s a geologist with 13 years of expertise in base and valuable metals exploration, mining geology and Mineral Useful resource estimation. He’s a Senior Mineral Useful resource Marketing consultant for The MSA Group (an impartial consulting firm), is registered with the South African Council for Pure Scientific Professions (SACNASP) and is a Member of the Geological Society of South Africa (GSSA). Mr. Goncalves has the suitable qualification and expertise to be thought of a “Certified Individual” for the model and sort of mineralisation and exercise being undertaken as outlined in Nationwide Instrument 43-101 Requirements of Disclosure of Mineral Initiatives.

Neither Mr. Goncalves nor any associates employed within the preparation of the Mineral Useful resource report (“Consultants”) have any helpful curiosity in Tantalex Lithium Sources Company. These Consultants will not be insiders, associates, or associates of Tantalex. The outcomes of the report will not be dependent upon any prior agreements regarding the conclusions to be reached, nor are there undisclosed understandings regarding any future enterprise dealing between Tantalex and the Consultants. The Consultants are to be paid a price for his or her work in accordance with regular skilled consulting practices.

Certified particular person

Mr. Rui Goncalves, Pr. Sci Nat, is the Certified Individual and has reviewed and permitted this press launch. The data on this press launch that pertains to the estimate of the Mineral Sources for the Manono Tailings Venture relies upon, and pretty represents, data and supporting documentation compiled by Mr. Goncalves.

About Tantalex Lithium Sources Company

Tantalex Lithium is an exploration and improvement stage mining firm engaged within the acquisition, exploration, improvement and distribution of lithium, tin, tantalum and different high-tech mineral properties in Africa.

It’s presently centered on growing its lithium property within the prolific Manono space within the Democratic Republic of Congo; The Manono Lithium Tailings Venture and the Pegmatite Hall Exploration Program.

Cautionary Observe Concerning Ahead Wanting Statements

The data on this information launch consists of sure data and statements about administration’s view of future occasions, expectations, plans and prospects that represent ahead trying statements. These statements are primarily based upon assumptions which are topic to important dangers and uncertainties. Due to these dangers and uncertainties and on account of quite a lot of elements, the precise outcomes, expectations, achievements or efficiency might differ materially from these anticipated and indicated by these ahead trying statements. Though Tantalex believes that the expectations mirrored in ahead trying statements are cheap, it can provide no assurances that the expectations of any ahead trying statements will show to be appropriate. Besides as required by legislation, Tantalex disclaims any intention and assumes no obligation to replace or revise any ahead trying statements to replicate precise outcomes, whether or not on account of new data, future occasions, modifications in assumptions, modifications in elements affecting such ahead trying statements or in any other case.

The Canadian Securities Alternate (CSE) has not reviewed this information launch and doesn’t settle for duty for its adequacy or accuracy.

For extra data, please contact:

Eric Allard

President & CEO

Electronic mail: [email protected]

Web site:www.tantalexlithium.com

Tel: 1-581-996-3007




Related Articles


Please enter your comment!
Please enter your name here

Latest Articles